Unistar International Co., Ltd.
Business type: Manufacturer
Telephone : 86-755-89487875
7F, R&D Building, Hongfa High-Tech Park, Tangtou Road, Shiyan, Bao'an, Shenzhen, China
|Place of Origin:||China|
|Certification:||CE RoHS TUV|
|Minimum Order Quantity:||1~100pcs|
|Packaging Details:||Standard Package|
|Delivery Time:||3~7 days|
|Payment Terms:||T/T, L/C, West Union|
|Supply Ability:||5000pcs per week|
LED WIFI Controller, Wireless LED RGB Strips Controller Dimmer For IPhone / Android Phone
iPhone or Android Phone WiFi LED Controller for Digital RGB Strips
With this high end LED WIFI Controller, You can use smart mobile phone iPhone or Android to control the LED lights. It would control RGB LED Strips and Single Color LED Strips.
This Controller is with twin antennas, it would only control RGB LED Strips and Single Color LED Strips.
LED-WiFi controller is following the traditional with infrared, RF technology controller foundation, it is birth of market and customer's demand, it is one type controller which integration the newest WiFi technical in the market. It makes the LED control more convenience, more hommization. We can use an Android system or iOS system mobile phone to install control software, then it can control LED, this is the wishes of every customer. Use WiFi technology can make our control range more wider, can get rid of narrow space constraint, in building can control more than 50m, in outdoor can control more than 100m. In the condition of not use the mobile software, also can use the remote control to control, very convenience, bring many choices for you.
1. Remote control technical parameters
1: Working temperature: -20~60℃
2: Power supply method: AAA*3
3: Supply voltage: 1.5V*3
4: Standby power: 0.015mW
5: Standby current: 3uA
6: Working current: 200uA
7: Emission current: 10mA
8: Remote control distance: about 50m
9: Standby time: 6 month
2. Software technical parameters
1: Name: Dream Color 1.0
2: Runtime platform: Android version support Android system (better one can support Samsung, HTC), iOS version support iOS system, equipment must have WiFi function.
3: Byte: Android version (622K), IOS version (581K)
4: Language: English
5: Category: communications
6: Free, green, no plug-ins
3. Controller technical parameters
1: Working voltage: DC 5~24V
2: Output control: can flexible control 3 channel, 2 channel, 1 channel LED lamps.
3: Output current: 4A*3
4: Connect mode: common anode
5: Packing dimension: L215*W165*H55 (mm)
6: External dimension: L107*W65*H30(mm)
7: Net weight: 340g
8: Gross weight: 480g
6: Receiving sensitivity: 802.11b DSSS (-5dBm), 802.11b CCK (-10dBm), 802.11g OFDM (-15dBm)
Explain installed hardware
1. Install ANT
ANT's installation drawing:clockwise install WIFI antenna and anticlockwise take down the antenna.
2. Install power supply and LED equipment
This connector structure belong to drawer structure, the device interface of power supply and LED is together, four interface one the left side (3,2,1,V+)is connect led equipment, the fifth interface is connect the anode V+ of power supply, the sixth interface is connect the cathode V_ of power supply. According to the rated voltage of led lamp, we supply power to controller, and the rated voltage of controller is 24V. As follows:
3. Connect three channels LED instruction
When connect three channels LED, you should put the Dream Color software switch to CD mode to use, only under this mode, you can control the LED's color, brightness and speed. Color disk adjust the color(Adjust process can be seen in the upper left corner R, G, B numerical with change),speed/brightness item adjust speed and bright("M" set the LED dynamic effect, "M" adjust the LED dynamic change.
4. Connect two channels LED instruction
When connect three channels LED, you should put the Dream Color software switch to CD mode to use, only under this mode, you can control the LED's color temperature, brightness and color temperature shortcut key settings. Color disk adjust the color temperature (meanwhile top left CW,WW numerical with change),brightness item adjust bright, "M" key set the special color temperature state.
5. Connect one channel LED instruction
When connect three channels LED, you should put the Dream Color software switch to CD mode to use, under this mode, use color disk control the LED's brightness, Adjust process can be seen in the upper left corner NM numerical with change.